please notify Asanté Technical Support.

 To discontinue a repeating test, click on the 'STOP' button.
 If your adapter fails any of the tests, please verify the integrity of your network 
 cabling. If your adapter is on a known good cable segment and the above tests fail,


 test length. You can repeat only the Memory Buffer, Network Interface Controller or
 Loopback tests.



 The 'REPEAT' function allows you to select one hardware test at a time and to specify the






 Bandwidth test - Calculates the total bandwidth utilization of the network.

 Ping-Pong Test - Verifies communication with another Macintosh on the network.


 Loopback Test - Performs loopback tests at the Serial Network Interface and Transceiver.


 Controller Test - Verifies the register integrity of the network interface controller chip.


 Memory Buffer Test - Verifies the addressability and operation of all buffer RAM.


 The available tests are:


 Click the 'TEST' button to execute the enabled tests.



 You can enable or disable the various tests by clicking on the checkboxes.





of the Asanté Ethernet Adapter.


to check the 
 hardware functionality and network connectivity 

 Asanté TroubleShooter is a utility that uses a combination of tests